About MGO Board - MGO Building Supplies

page-template,page-template-full_width,page-template-full_width-php,page,page-id-108,ajax_fade,page_not_loaded,,qode_grid_1300,footer_responsive_adv,hide_top_bar_on_mobile_header,qode-content-sidebar-responsive,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-6.5.0,vc_responsive

About MGO Board

What is MGO Board?

MGO board (Magnesium Oxide board) is a factory-made, non-insulating building board product.

It can be used for a number of applications including internal and external wall and ceiling linings, fascias, soffits, tile backing and floorings, and is particularly suitable for use in fire rated wall and lining systems.

Product Data

Material: Modified magnesia cement
Fireproofing characteristic: A grade non-combustible
Density: 0.96g/cm3
Intensity of bending resistance when dry: 18Mpa
Intensity of bending resistance when moisture-saturated condition: 22Mpa
The rate of deformation when pick up the moisture: 0.26%
The shrinking rate when heated: 1.0%
Water permeability: There is no drop of water to emerge in the back
Impact resistance: No crack, strip and run through
Thermal resistance: 1.14m2k/w
Sound insulation
Colour: White
Security: 100% does not include asbestos, formaldehyde, and benzene
Radioactivity: Not limited by the scope of application

MGO Corp Board Ranges

Recessed edge

MGO Corp Board Recessed Edge

1.5mm on the long face side allows joint reinforcement
Provides a smooth even and continuous surface once joined

Square Edge

MGO Corp Board Square Edge

Square edge finishing
The square edge allows sheets to be butted up together neatly
These joints may be covered with aluminium, vinyl or timber mouldings

Extraordinary FIRE performance for wall, ceiling and flooring applications

Easily achieve 90 min fire performance with 10mm MGO board and 120min fire performance with 12mm MGO board

Rescom Thickness	Single Panel Performance	Single Panel on Stud	Single Panel either side of Stud: System Excl Acoustic Requirements
10mm	60 Mins	Non-loadbearing wall -/60/60 Loadbearing wall – 60/60/60	Non-loadbearing wall -/60/60 Loadbearing wall – 60/60/60 (Thermal Insulation Required in Ceiling Cavity)
10mm	90 Mins	Non-loadbearing wall -/90/90 Loadbearing wall – 90/90/90	Non-loadbearing wall -/90/90 Loadbearing wall – 90/90/90 (Thermal Insulation Required in Ceiling Cavity)
12mm	120 Mins	Non-loadbearing wall -/120/120 Loadbearing wall – 120/120/120	Non-loadbearing wall -/120/120 Loadbearing wall – 120/120/120 (Thermal Insulation Required in Ceiling Cavity)
14mm	180 Mins	Non-loadbearing wall -/180/180 Loadbearing wall – 180/180/180	Non-loadbearing wall -/180/180 Loadbearing wall – 180/180/180 (Thermal Insulation Required in Ceiling Cavity)
15mm	240 Mins	Non-loadbearing wall -/240/240 Loadbearing wall – 240/240/240	Non-loadbearing wall -/240/240 Loadbearing wall – 240/240/240 (Thermal Insulation Required in Ceiling Cavity)
18mm Flooring	120 Mins	Non-loadbearing wall -/120/120 Loadbearing wall – 120/120/120	Non-loadbearing wall -/120/120 Loadbearing wall – 120/120/120 (Thermal Insulation Required in Ceiling Cavity)

Suitable for wide range of decorative finishing including paint, wall paper, texture coating, etc.

WHY MGO BOARD?

MgO Corp Board has been proven to drastically reduce your building cost. It offers savings of up to 67% on material and labour to that of traditional fire separation and party walls

For instance, in construction in Australia and New Zealand a non-load bearing fire separation wall using the most recognised and reliable double fire sheeting system will cost you, the consumer, a minimum of 50% more in materials and labour than the MgO Corp Board System.

The same can be said about acoustic requirements and the application of MgO Corp Board shearing systems to dramatically deliver the consumer a higher quality system as a much reduced pricing point. The amazing major point of difference is that MgO Corp Board delivers all the above and below benefits in the one product: